 |
| Quantity: | |
|---|---|
SP-CR40
SP
8543709990
Ultrasonic rubber cutting principle is through the ultrasonic generator 50 / 60Hz current into 20,30 or 40kHz power. The converted high frequency electrical energy is again converted into mechanical vibrations of the same frequency by means of transducers, which are then transmitted to the cutter through a set of amplitude modulator means which can vary the amplitude. The cutter transmits the received vibration energy to the cutting surface of the workpiece to be cut, in which the vibration energy is cut by activating the molecular energy of the rubber and opening the molecular chain.
Frequency | 40Khz |
Power | 500W |
Input | 110V/220V, 50/60Hz |
Ultrasound Working Methods | Intermittent/ Continuous |
Material of Knife | Titanium alloy |
Accessories | Ultrasonic rubber cutter: 1pc Ultrasonic Generator: 1pc Power cable: 1pc Transducer cable: 1pc External control line: 1pc |
Cooling Way | Air Cooling |
1. High cutting precision, no deformation of rubber compound
2. Good surface finish and good bonding performance
3. Easy to apply to automated production
4. Fast speed, high efficiency, no pollution
5. Cross-cutting and slitting methods are available
6. No deformation after cutting;cutting surface is very smooth.
7. Connect with PLC robotic arm to work
Ultrasonic cutting is the use of ultrasonic energy to locally heat and melt the material being cut to achieve the purpose of cutting the material. It can easily cut resin, rubber, non-woven fabric, film, various overlapping composite materials and food. The principle of the ultrasonic cutting machine is completely different from the traditional pressure cutting.
Traditional cutting uses a knife with a sharp cutting edge, which concentrates very large pressure on the cutting edge and presses against the material being cut. When the pressure exceeds the shear strength of the material being cut, the molecular bond of the material is pulled apart, thereby achieving cutting. Because the material is pulled apart by strong pressure, the cutting edge of the cutting tool must be very sharp, and the material itself must withstand relatively high pressure. Therefore, the cutting effect of soft and elastic materials is not good, and it is more difficult for viscous materials.
1. Do you have it in stock?
We only have common products in stock but not for the nonstandard products.Because all the products need make based on customers' different requirements.
2. Could you advise to us the design based on our special requirements or based on our object samples?
Of course, we can do. Please tell us your idea or your application.
If you have sample object, send it to us or send detail pictures.
3.How long do you make the order product?
Common products for 7days, big qty and none standard products for 20days.
4. Do you have operating manual?
Of course, we will put it with the goods together.
5. How about the quality?
We have export to many other customers from all over the world, the feed back is good,quality is the first of our company.
6. Could you do OEM?
Yes, of course. We can produce according customers' requirement, just send us your requirements and design of drawing and sample.
7. Could we as your agent?
Of course. We are looking for sole agent in Country who have the willing to cooperate with us for long business term.
8. Payment:100%T/T in advance for small order. 70%T/T in advance as deposit, 30%T/T paid before shipment
9. Delivery?
1-2 units we could send by EXPRESS(DHL, UPS, FEDEX, TNT, EMS), heavy weight more than 50kg,we suggest to use sea freight LCL or by air.
10. Warranty:
One years Warranty with none human damage. After warranty time, factory will repair fix it or send the new parts on cost price. We can produce according customers'requirements, OEM is available, pls send me inquiry for quotations.
Ultrasonic rubber cutting principle is through the ultrasonic generator 50 / 60Hz current into 20,30 or 40kHz power. The converted high frequency electrical energy is again converted into mechanical vibrations of the same frequency by means of transducers, which are then transmitted to the cutter through a set of amplitude modulator means which can vary the amplitude. The cutter transmits the received vibration energy to the cutting surface of the workpiece to be cut, in which the vibration energy is cut by activating the molecular energy of the rubber and opening the molecular chain.
Frequency | 40Khz |
Power | 500W |
Input | 110V/220V, 50/60Hz |
Ultrasound Working Methods | Intermittent/ Continuous |
Material of Knife | Titanium alloy |
Accessories | Ultrasonic rubber cutter: 1pc Ultrasonic Generator: 1pc Power cable: 1pc Transducer cable: 1pc External control line: 1pc |
Cooling Way | Air Cooling |
1. High cutting precision, no deformation of rubber compound
2. Good surface finish and good bonding performance
3. Easy to apply to automated production
4. Fast speed, high efficiency, no pollution
5. Cross-cutting and slitting methods are available
6. No deformation after cutting;cutting surface is very smooth.
7. Connect with PLC robotic arm to work
Ultrasonic cutting is the use of ultrasonic energy to locally heat and melt the material being cut to achieve the purpose of cutting the material. It can easily cut resin, rubber, non-woven fabric, film, various overlapping composite materials and food. The principle of the ultrasonic cutting machine is completely different from the traditional pressure cutting.
Traditional cutting uses a knife with a sharp cutting edge, which concentrates very large pressure on the cutting edge and presses against the material being cut. When the pressure exceeds the shear strength of the material being cut, the molecular bond of the material is pulled apart, thereby achieving cutting. Because the material is pulled apart by strong pressure, the cutting edge of the cutting tool must be very sharp, and the material itself must withstand relatively high pressure. Therefore, the cutting effect of soft and elastic materials is not good, and it is more difficult for viscous materials.
1. Do you have it in stock?
We only have common products in stock but not for the nonstandard products.Because all the products need make based on customers' different requirements.
2. Could you advise to us the design based on our special requirements or based on our object samples?
Of course, we can do. Please tell us your idea or your application.
If you have sample object, send it to us or send detail pictures.
3.How long do you make the order product?
Common products for 7days, big qty and none standard products for 20days.
4. Do you have operating manual?
Of course, we will put it with the goods together.
5. How about the quality?
We have export to many other customers from all over the world, the feed back is good,quality is the first of our company.
6. Could you do OEM?
Yes, of course. We can produce according customers' requirement, just send us your requirements and design of drawing and sample.
7. Could we as your agent?
Of course. We are looking for sole agent in Country who have the willing to cooperate with us for long business term.
8. Payment:100%T/T in advance for small order. 70%T/T in advance as deposit, 30%T/T paid before shipment
9. Delivery?
1-2 units we could send by EXPRESS(DHL, UPS, FEDEX, TNT, EMS), heavy weight more than 50kg,we suggest to use sea freight LCL or by air.
10. Warranty:
One years Warranty with none human damage. After warranty time, factory will repair fix it or send the new parts on cost price. We can produce according customers'requirements, OEM is available, pls send me inquiry for quotations.
NEWSLETTER