How To Use Ultrasonic Welding Equipment To Weld Bicycle Reflectors

The two most widely used reflectors for bicycles, the two most widely used reflectors for bicycles, two kinds of round and long strips, the plastic materials are PC or PMMA, after the injection parts are assembled, the ultrasonic welding machine is used to complete the assembly process , it is mainly installed on the side of the bicycle or on the front shock absorber, with a diameter of 59 mm, there are two kinds of yellow and red, usually the yellow style is installed, the back is fixed by screws, and double-sided tape can also be used; mainly used for domestic cyclists, Curved beam car, scooter, electric car, ATV, etc. There are two kinds of round and long strips. The plastic materials are PC and PMMA. After the injection parts are assembled, the ultrasonic welding machine is used to complete the assembly process. It is mainly installed on the side of the bicycle or the front shock absorber. The diameter is 59 mm. And red two, usually the yellow style is installed, the back is fixed with screws, and double-sided tape can also be used; mainly used for domestic knights, curved beam vehicles, scooters, electric vehicles, ATVs, etc.

The ultrasonic welding machine for bicycle reflector lamps can be called reflector welding equipment. It uses ultrasonic technology to weld the upper and lower shells of the reflector firmly, and the product is made with ultrasonic welding lines, replacing the original screwing process, which is more efficient and cost-effective.

Parameters of ultrasonic welding machine for bicycle reflector lamps:

Stable structure: The international popular square steel column structure is adopted, which reduces the backward tilt by 40%.

Environmental protection: The traditional ultrasonic welding machine column generally adopts the surface electroplating process after steel pipe processing, and Kaili adopts advanced environmental protection powder spraying and baking paint. Thereby reducing the pollution to the environment due to electroplating.

High precision: The machine table of the ordinary ultrasonic welding machine adopts a cylindrical double-ring lock structure, and the deviation of the machine table up and down is large. The Kaili uses a high-precision machine tool dovetail groove guide structure, which is the precision required for the production of ultrasonic equipment.