 |
| Quantity: | |
|---|---|
SPS20-1000S
SP
8543709990
In order to take full advantage of ultrasonic cavitation, an ultrasonic amplitude of at least 70 microns is usually required.
At low amplitudes (below about 50 microns), cavitation strength is insufficient for most processes, including nanoparticle production (e.g., nanoemulsions, liposomes, nanocrystals), extraction, cell breakdown, depolymerization, etc.
In order to amplify the amplitude and transfer the cavitation energy to the fluid, the ultrasonic processor combines a high-gain acoustic probe.
The SPS20-1000/2000/3000 ultrasonic sonicator is most commonly supplied with a 1000W/2000W/3000W ultrasonic digital generator, air cooling transducer, and full-wave horn(probe). Optional items include a flowing reactor, different shape horn, flow meter, flange and transfer pump.
Model | SPS20-500S | SPS20-1000S | SPS20-1000 | SPS20-2000 | SPS20-3000 | SPS20-3000Z |
Frequency | 20Khz | 20Khz | 20Khz | 20Khz | 20Khz | 20Khz |
Power | 500 W | 1000 W | 1000 W | 2000W | 3000W | 3000 W |
Voltage | 220V | 220V | 220V | 220V | 220V | 220V |
Pressure | Normal | Normal | Normal | 35 MPa | 35 MPa | 35 MPa |
Intensity of sound | ＞10 W/cm² | ＞10 W/cm² | ＞10 W/cm² | ＞40 W/cm² | ＞60 W/cm² | ＞60 W/cm² |
Processing capacity (L/H) | 0.5-2.0 | 1.0-4.0 | 5.0 | 20.0 | 50.0 | 100.0 |
Material of probe | Titanium Alloy | Titanium Alloy | Titanium Alloy | Titanium Alloy | Titanium Alloy | Titanium Alloy |
Generator | Digital type | Digital type | Digital type | Digital type | Digital type | Digital type |
1. The emulsification quality is high. The average droplet size of the formed emulsion is small, which can reach 0.2~2um. The droplet size distribution range is narrow, up to 0.1~10um. The concentration is high, the concentration of pure emulsion can reach 30%, adding emulsifier can reach 70%.
2. The emulsification is stable, you can produce stable emulsions without or with less emulsifiers, and some can be stable for several months or even more than half a year, with low energy consumption, high production efficiency and low cost.
3. The type of emulsion can be controlled. Under certain sound field conditions, both oil-in-water and water-in-oil emulsions can be prepared. However, it is impossible to achieve mechanical emulsification. Only the properties of emulsifiers can control the type of emulsion. For example, when toluene is emulsified in water, one type of emulsion can be formed under low sound intensity conditions, and another type of emulsion can be formed under high sound intensity conditions.
4. Low power required to produce emulsion.
5. The type of emulsion can be controlled. Using ultrasonic emulsification, under certain sound field conditions, both O/W (oil-in-water) and W/O (water-in-oil) emulsions can be prepared; however, mechanical emulsification is impossible, and only the properties of the emulsifier can control the emulsion type.
Customers' evalution as follow:
The ultrasonic sonicator works very well.
We improved yield by 5% if we run for 5 minutes.
You have been most kind and helpful. Thank you for your expert communication.
Customers' recognition and trust is our driving force.
Shengpai Technology relies on “Customer Service Being First” as its corporate culture. Aim is ”Quality First, Service First”. Today, because of its abundant professional knowledge and good after-sales service, Shengpai Technology has gained a very good reputation.
In order to take full advantage of ultrasonic cavitation, an ultrasonic amplitude of at least 70 microns is usually required.
At low amplitudes (below about 50 microns), cavitation strength is insufficient for most processes, including nanoparticle production (e.g., nanoemulsions, liposomes, nanocrystals), extraction, cell breakdown, depolymerization, etc.
In order to amplify the amplitude and transfer the cavitation energy to the fluid, the ultrasonic processor combines a high-gain acoustic probe.
The SPS20-1000/2000/3000 ultrasonic sonicator is most commonly supplied with a 1000W/2000W/3000W ultrasonic digital generator, air cooling transducer, and full-wave horn(probe). Optional items include a flowing reactor, different shape horn, flow meter, flange and transfer pump.
Model | SPS20-500S | SPS20-1000S | SPS20-1000 | SPS20-2000 | SPS20-3000 | SPS20-3000Z |
Frequency | 20Khz | 20Khz | 20Khz | 20Khz | 20Khz | 20Khz |
Power | 500 W | 1000 W | 1000 W | 2000W | 3000W | 3000 W |
Voltage | 220V | 220V | 220V | 220V | 220V | 220V |
Pressure | Normal | Normal | Normal | 35 MPa | 35 MPa | 35 MPa |
Intensity of sound | ＞10 W/cm² | ＞10 W/cm² | ＞10 W/cm² | ＞40 W/cm² | ＞60 W/cm² | ＞60 W/cm² |
Processing capacity (L/H) | 0.5-2.0 | 1.0-4.0 | 5.0 | 20.0 | 50.0 | 100.0 |
Material of probe | Titanium Alloy | Titanium Alloy | Titanium Alloy | Titanium Alloy | Titanium Alloy | Titanium Alloy |
Generator | Digital type | Digital type | Digital type | Digital type | Digital type | Digital type |
1. The emulsification quality is high. The average droplet size of the formed emulsion is small, which can reach 0.2~2um. The droplet size distribution range is narrow, up to 0.1~10um. The concentration is high, the concentration of pure emulsion can reach 30%, adding emulsifier can reach 70%.
2. The emulsification is stable, you can produce stable emulsions without or with less emulsifiers, and some can be stable for several months or even more than half a year, with low energy consumption, high production efficiency and low cost.
3. The type of emulsion can be controlled. Under certain sound field conditions, both oil-in-water and water-in-oil emulsions can be prepared. However, it is impossible to achieve mechanical emulsification. Only the properties of emulsifiers can control the type of emulsion. For example, when toluene is emulsified in water, one type of emulsion can be formed under low sound intensity conditions, and another type of emulsion can be formed under high sound intensity conditions.
4. Low power required to produce emulsion.
5. The type of emulsion can be controlled. Using ultrasonic emulsification, under certain sound field conditions, both O/W (oil-in-water) and W/O (water-in-oil) emulsions can be prepared; however, mechanical emulsification is impossible, and only the properties of the emulsifier can control the emulsion type.
Customers' evalution as follow:
The ultrasonic sonicator works very well.
We improved yield by 5% if we run for 5 minutes.
You have been most kind and helpful. Thank you for your expert communication.
Customers' recognition and trust is our driving force.
Shengpai Technology relies on “Customer Service Being First” as its corporate culture. Aim is ”Quality First, Service First”. Today, because of its abundant professional knowledge and good after-sales service, Shengpai Technology has gained a very good reputation.
NEWSLETTER