 |
| Quantity: | |
|---|---|
SPS20-2000
SP
8543709990
Ultrasonic homogenizers(ultrasonic dispersing equipment), sometimes called sonicators or sonifiers, destroy tissue and cells through cavitation and ultrasound.
They consist of three parts:
A generator that provides and controls the power
A transducer (also known as a converter) containing a piezoelectric crystal that converts electrical energy into mechanical motion at very high frequency.The converter also amplifies the signal.
The titanium probe or "horn" vibrates rapidly along the longitudinal direction to transmit ultrasonic energy to the sample.
Homogenization occurs both directly through ultrasonic forces and through cavitation (the rapid formation and rupture of bubbles).
The combination of these forces makes ultrasonic homogenizers ideal for cell rupture and particle size reduction.
In the video below，you can see that the water below the tip has forcefully cracked. The "misty" appearance of water is the formation and bursting of tiny bubbles.
Model | SPS20-2000 |
Frequency | 20Khz |
Power | 2000W |
Voltage | 220V |
Pressure | 35 MPa |
Intensity of sound | ＞40 W/cm⊃2; |
Processing capacity (L/H) | 20.0 |
Material of probe | Titanium Alloy |
Generator | Digital type |
1. Graphene dispersion
2. Silica dispersion
3. Paint dispersion
4. Alumina dispersion
5. Lithium battery slurry
6. Nano materials
Ultrasonic sonicator are powerful, but they also generate a lot of heat and noise as a result of their use of ultrasonic energy.
Therefore, it is highly recommended that you use ear protectors and/or keep them in an insulated housing to reduce noise levels during the homogenization process. Reaction kettle, cooling device and circulation device can be designed according to your application requirements.
To maximize the life of the speaker, clean and dry the speaker after each use.
Failure to properly maintain the horn can lead to pitting (localized corrosion that creates holes in the titanium), which can reduce the horn's effectiveness.
Ultrasonic sonicator must be used with liquid samples.
They are not suitable for dry homogenization applications.
Immerse the horn into the sample before turning on the instrument and ensure that the horn does not touch the sides of the container during operation.
Customers' evalution as follow:
The ultrasonic sonicator works very well.
We improved yield by 5% if we run for 5 minutes.
You have been most kind and helpful. Thank you for your expert communication.
Customers' recognition and trust is our driving force.
Shengpai Technology relies on “Customer Service Being First” as its corporate culture. Aim is ”Quality First, Service First”. Today, because of its abundant professional knowledge and good after-sales service, Shengpai Technology has gained a very good reputation.
1. Do you have it in stock?
We only have common products in stock but not for the nonstandard products.Because all the products need make based on customers' different requirements.
2. Could you advise to us the design based on our special requirements or based on our object samples?
Of course, we can do. Please tell us your idea or your application.
If you have sample object, send it to us or send detail pictures.
3.How long do you make the order product?
Common products for 7days, big qty and none standard products for 20days.
4. Do you have operating manual?
Of course, we will put it with the goods together.
5. How about the quality?
We have export to many other customers from all over the world, the feed back is good,quality is the first of our company.
6. Could you do OEM?
Yes, of course. We can produce according customers' requirement, just send us your requirements and design of drawing and sample.
7. Could we as your agent?
Of course. We are looking for sole agent in Country who have the willing to cooperate with us for long business term.
8. Payment: 100%T/T in advance for small order. 70%T/T in advance as deposit, 30%T/T paid before shipment.
9. Delivery?
1-2 units we could send by EXPRESS(DHL, UPS, FEDEX, TNT, EMS), heavy weight more than 50kg, we suggest to use sea freight LCL or by air.
10. Warranty:
One years Warranty with none human damage. After warranty time, factory will repair fix it or send the new parts on cost price.
Ultrasonic homogenizers(ultrasonic dispersing equipment), sometimes called sonicators or sonifiers, destroy tissue and cells through cavitation and ultrasound.
They consist of three parts:
A generator that provides and controls the power
A transducer (also known as a converter) containing a piezoelectric crystal that converts electrical energy into mechanical motion at very high frequency.The converter also amplifies the signal.
The titanium probe or "horn" vibrates rapidly along the longitudinal direction to transmit ultrasonic energy to the sample.
Homogenization occurs both directly through ultrasonic forces and through cavitation (the rapid formation and rupture of bubbles).
The combination of these forces makes ultrasonic homogenizers ideal for cell rupture and particle size reduction.
In the video below，you can see that the water below the tip has forcefully cracked. The "misty" appearance of water is the formation and bursting of tiny bubbles.
Model | SPS20-2000 |
Frequency | 20Khz |
Power | 2000W |
Voltage | 220V |
Pressure | 35 MPa |
Intensity of sound | ＞40 W/cm⊃2; |
Processing capacity (L/H) | 20.0 |
Material of probe | Titanium Alloy |
Generator | Digital type |
1. Graphene dispersion
2. Silica dispersion
3. Paint dispersion
4. Alumina dispersion
5. Lithium battery slurry
6. Nano materials
Ultrasonic sonicator are powerful, but they also generate a lot of heat and noise as a result of their use of ultrasonic energy.
Therefore, it is highly recommended that you use ear protectors and/or keep them in an insulated housing to reduce noise levels during the homogenization process. Reaction kettle, cooling device and circulation device can be designed according to your application requirements.
To maximize the life of the speaker, clean and dry the speaker after each use.
Failure to properly maintain the horn can lead to pitting (localized corrosion that creates holes in the titanium), which can reduce the horn's effectiveness.
Ultrasonic sonicator must be used with liquid samples.
They are not suitable for dry homogenization applications.
Immerse the horn into the sample before turning on the instrument and ensure that the horn does not touch the sides of the container during operation.
Customers' evalution as follow:
The ultrasonic sonicator works very well.
We improved yield by 5% if we run for 5 minutes.
You have been most kind and helpful. Thank you for your expert communication.
Customers' recognition and trust is our driving force.
Shengpai Technology relies on “Customer Service Being First” as its corporate culture. Aim is ”Quality First, Service First”. Today, because of its abundant professional knowledge and good after-sales service, Shengpai Technology has gained a very good reputation.
1. Do you have it in stock?
We only have common products in stock but not for the nonstandard products.Because all the products need make based on customers' different requirements.
2. Could you advise to us the design based on our special requirements or based on our object samples?
Of course, we can do. Please tell us your idea or your application.
If you have sample object, send it to us or send detail pictures.
3.How long do you make the order product?
Common products for 7days, big qty and none standard products for 20days.
4. Do you have operating manual?
Of course, we will put it with the goods together.
5. How about the quality?
We have export to many other customers from all over the world, the feed back is good,quality is the first of our company.
6. Could you do OEM?
Yes, of course. We can produce according customers' requirement, just send us your requirements and design of drawing and sample.
7. Could we as your agent?
Of course. We are looking for sole agent in Country who have the willing to cooperate with us for long business term.
8. Payment: 100%T/T in advance for small order. 70%T/T in advance as deposit, 30%T/T paid before shipment.
9. Delivery?
1-2 units we could send by EXPRESS(DHL, UPS, FEDEX, TNT, EMS), heavy weight more than 50kg, we suggest to use sea freight LCL or by air.
10. Warranty:
One years Warranty with none human damage. After warranty time, factory will repair fix it or send the new parts on cost price.
NEWSLETTER