 |
| Quantity: | |
|---|---|
SP-AM20
SP
8543709990
Ultrasonic assisted system is a new technology of processing method which could enhance the milling and drilling performance through high frequency micro vibrations. Ultrasonic assisted system is constituted of 3 parts: ultrasonic generator, ultrasonic transducer and ultrasonic horn.
The whole ultrasonic system uses particular resonance theory to optimize the impedance matching of subsystems such as ultrasonic power, transducer, horn and holder, so as to ensure the continuous working stability of the system. Reduce energy consumption and save cost.
 |  |
Using wireless transmission technology. For surface-to-surface or ring-to-ring, the emitter can be 1/4 circle to whole round, adapt to different processing machine and machining center, and realize the quick cutters change.
| Working frequency | 20khz |
| Power | 500w |
| Product mode | BT/ ISO/ HSK/ CAT series drilling machine handle |
| Amplitude | 10um or more(adjustable) |
| Speed | 20000 r/min |
| Matching tool | Carbide drilling head Φ2-Φ10mm |
The ultrasonic processing can be used for high speed milling,drilling, grinding, and boring.
Under the same condition, the surface roughness can be increased byone magnitude. For processing of hard and brittle materials, the machiningefficiency can be increaseed 100% than that of the traditional machining.The tool lifespan can be increased more than 3 times.
Ultrasonic assisted system is a new technology of processing method which could enhance the milling and drilling performance through high frequency micro vibrations. Ultrasonic assisted system is constituted of 3 parts: ultrasonic generator, ultrasonic transducer and ultrasonic horn.
The whole ultrasonic system uses particular resonance theory to optimize the impedance matching of subsystems such as ultrasonic power, transducer, horn and holder, so as to ensure the continuous working stability of the system. Reduce energy consumption and save cost.
| |
Using wireless transmission technology. For surface-to-surface or ring-to-ring, the emitter can be 1/4 circle to whole round, adapt to different processing machine and machining center, and realize the quick cutters change.
| Working frequency | 20khz |
| Power | 500w |
| Product mode | BT/ ISO/ HSK/ CAT series drilling machine handle |
| Amplitude | 10um or more(adjustable) |
| Speed | 20000 r/min |
| Matching tool | Carbide drilling head Φ2-Φ10mm |
The ultrasonic processing can be used for high speed milling,drilling, grinding, and boring.
Under the same condition, the surface roughness can be increased byone magnitude. For processing of hard and brittle materials, the machiningefficiency can be increaseed 100% than that of the traditional machining.The tool lifespan can be increased more than 3 times.
NEWSLETTER